1:10 Daytona SP3 Sports Car Building Blocks----T5032
▼Refinement picture display
▼2438 pieces, the front view of the box is the black background plus the real thing, the details and movable parts are introduced on the back, and the finished product size mark is on the side.
The official size is: 48*27.5*13.6, in cm. Annotated at 1:10 scale. There is also a very high reduction wheel hub on the side.
Standard static version, you can bring your own or purchase dynamic upgrade package for remote control version upgrade, dynamic components include (XL motor*2, servo motor*1, remote control*1, 2.4G lithium battery*1)
▼Two inner boxes are drawn out of the drawer type. There is no ziplock bag for this product, only the general bag has it. I like the ziplock bag.
The number of various general parts packages is as follows. It is very commendable that this subcontracting has been changed to 3 bags per step, and the whole product is 2400 pieces, 7 large steps, which means that if there are more than 300 particles in one step, this subcontracting will be very comfortable!
The tires use drift hard skins, and then add the look of the hubcaps.
▼A manual, with step subcontracting, a total of 7 major steps.
If you buy the dynamic version, you can paste the label according to the motor logo on the homepage, and then connect, and first test whether the motor works normally. Dynamic and static are in the same manual, static friends look at the same steps in gray, dynamic ones in green at the same steps, and a quick-release switch is designed, so that after finishing static, you can finally add dynamic components in 1 minute. .
Looking at the manual, Taigao officially uses the red explosion motor.
▼The sticker is done after the final completion. One sticker needs to be pasted in a total of 13 positions.
All parts are self-produced parts. The general-purpose pins are classified, and the feel of the pins has been improved. What is more special is that the current small sub-bags are also printed with a date. You can check whether the pins have been upgraded from this point.
▼The fight is over. Starting from the rear axle, I seem to have seen this power design. On another driftable 911, the 20-tooth gear in the middle is driven by a unilateral 20-tooth gear, and then linked to the 20-tooth of the engine above to realize the engine linkage function. . , let the motor connect directly to the differential with no power loss.
The middle drive shaft is designed to be linked to the front engine. Front and rear drive design.
As a reminder, some parts you can't find can be found in the general package.
This time, the ignition coil and spark plug are restored next to the engine piston, which is expressed in a small car. Of course, if you are a dynamic version, you can test the smoothness of the piston on the motor.
▼ Open to see, leaving a large space, enough space for two XL motors.
You can see some brand new parts later, and the sensible Jiyou already understands it.
This rear end, no matter who it is, can recognize it at a glance. The visual sense of the thousand layer cake.
▼The rear of the car is connected to the car body with bricks. It is tight and secure.
The back cover is a very large module, and the restoration of the curve is also good.
I have reminded countless times that when all the rack parts are assembled, pay attention to the relationship between the centering of the rack and the positive cross axis in the middle of the gear, which affects whether your car can go straight in the end. The entire body has no suspension springs.
▼The structure of the door should be accurate, the manual will interfere slightly, just read more.
Installed to the exterior very quickly, proving our set is almost done.
The parts under the headlights are also in the style of a layer cake.
When you can't find the parts, just look for the general bag. For example the hose for step 461 is in the universal bag.
▼It is strongly recommended that everyone learn from my method, first connect the whole hose, adjust the angle and then cut it.
The tires are pre-installed, which is also great. All we have to do is put the brake disc on, and then install the hubcap, and we can get a wheel with a high degree of restoration.
You also know the parts of the roof.
▼360-degree display of finished products
▼From the perspective of the chassis, you can clearly see the space reserved for the motor. This kind of real quick assembly and quick disassembly is very effective. The headlights are not very nice.
▼The restoration of the middle net is good, and the car logo in the middle should be pasted across the bricks.
The front cover can be opened and closed, and there are designed support rods inside.
Technology supercars are sent to the front bag, but only space is left.
▼The wheel hub style is also a newly opened hubcap. This tire skin is one of the drift tires. The car logo is completely replaced with the TGL logo, and advertisements are implanted. The A-pillars are assembled with flexible shafts.
▼The assembly method of the rearview mirror is the first time, although it is a little thicker, but the effect is good.
There are also details such as the central control in the car, and the rear of the car is something that I personally think can be changed.
We should bend a bigger curve, now mine will get stuck on the wheel and affect the wheel rotation.
There is an oil filling port on the left side, this guy burns 98 oil!
▼The license plate also uses the article number method, which is great.
The angle of the rear is also the most familiar.
▼Continue to pull out the Wuling magic car before Tai Gaole, I like it more and more, if you haven't read the evaluation, you can take a look!
▼Because there is no suspension, there is no rebound effect. The push is very smooth.
The roof is a quick-release design, which can be lifted as soon as it is picked up.
Of course, there must be a linkage between the steering wheel and the wheel steering. The rearview mirror can also be rotated at multiple angles.
It is worth mentioning that this pair of doors can be opened and closed in two ways.
One is to open and close the door directly. The other is to depress the blue part behind the seat.
Install the motor：
▼ After reading the manual, the quick-release design this time is also extremely simple, and the proficient friends can really complete it in 1 minute. Turn the car upside down and connect the servo directly to the XL motor. That's it. The process is surprisingly easy. I give 10 points to this design.
Usually I do not recommend that you use different brands of motors, because the speed, torque and voltage may be different. But I found that my family didn't have two identical XL motors, so I had to mix them first, so that everyone could see the effect.
In this design, there is no cut-off on one side. When inserting the XL motor, the cross axis may move backwards, making the function of one side missing. Please pay attention to it.
▼The advantage of quick disassembly and quick installation is that after playing for a while, you can disassemble them and use them for other vehicles. Next time you want to play, you can install them in just 1 minute.
It is said that the Red Boom motor can also drift on smooth ground, but I didn't buy the Red Boom suit, so I don't know if it will work.
That's All ! Thanks for your follow and Visiting!We'll see you next time! Welcome to Purchase Here if you are interested in that!
